Community Open the builder

3D printable airsoft gun builder for V2 gearbox M4s

Airsoft Forge is a free browser tool for designing your own M4-style airsoft gun and 3D printing it. Pick a handguard shape, cut your own patterns into it, add a pistol grip, mag shell, battery stock and sights, color every part, then download print-ready files. Drop in a V2 gearbox and you're running a gun nobody else has.

Start building, it's freeSee community builds
⚠ For V2 gearbox AEGs only. These parts won't fit V3, V7, GBB or other gearbox types.
3D printable M4 airsoft gun built in Airsoft Forge with a red custom handguard, pistol grip and M4 mag on a V2 gearbox receiver

What you can 3D print

Handguard

Round, faceted, rounded square, flat top, oval or M16 ribbed. Set length, diameter, rail positions and cut your own patterns. Clamps on over the outer barrel.

Pistol grip

Fits the lower and hosts the motor. Textures, finger grooves, taper, hand stop and extra length.

M4 & M16 mag shells

30-round curved or 20-round straight midcap shells with a double-stack BB lane and your choice of side texture.

Battery stock tube

Stock-mounted or under the grip, with a butt plate option.

Sights & accessories

M16 carry handle, M16 and A-frame front sights, fiber sights, vertical and angled grips, hand stops, rail covers, lasers, flashlights and a DIY UV tracer unit.

Colors & 3MF

Color every part or pick one of 20 themes. The export is a pre-colored 3MF ready for multi-color printers.

How it works

  1. Design it. Open the builder and change anything. Hit randomize if you want ideas.
  2. Check the fit. The 3D view shows your parts on a real M4 upper and lower so you can see it all line up.
  3. Export. $9.99 gets you full-detail STLs plus a colored 3MF of that exact build. Same build again later is free.
  4. Print and build. Print the parts, then install your V2 gearbox, motor, hop-up and inner barrel.

Mag shells that fit the M4 magwell

3D printable M4 30-round and M16 20-round airsoft mag shells seated in an M4 lower receiver

FAQ

Is this a fully 3D printable airsoft gun?

Airsoft Forge gives you the printed body parts for an M4-style AEG: the handguard, pistol grip, M4 or M16 mag shell, battery stock tube and sights. The parts that make it shoot still come from a standard V2 gearbox AEG: the gearbox, motor, hop-up, inner barrel and battery.

What gearbox does it fit?

V2 gearbox M4 AEGs only. The grip, mag and lower fit around a standard version 2 gearbox. It will not fit V3 (AK), V7, GBB or HPA-only builds without changes.

What printer and filament do I need?

Any FDM printer with a bed of about 220 x 220 mm. PLA+ is fine for most parts; PETG or ABS/ASA hold up better in hot weather and for the handguard.

How much does it cost?

Designing is free. When you like your build, you pay $9.99 per export for the full-detail print files (STL and a pre-colored 3MF). Re-downloading the same build is free.

Do the mags actually feed?

The M4 30-round and M16 20-round shells are midcap-style: a double-stack BB lane with a donor midcap spring. The feed block is based on GooseWerks' 20 Round Midcap (CC BY 4.0).

Can I sell what I print?

Yes. Prints and files are yours to sell or share, as long as the listing credits 'Designed with Airsoft Forge by Rapid Forge' with a link to airsoftforge.rapid-forge.com.

Build your airsoft gun
⚠ For V2 gearbox AEGs only.